*** Tannoy VX Series BI-AMP MODE ***
*** Tannoy VX Series BI-AMP MODE LF CUT ***
___________________________________________________________________

PLM & LM Series preset for Tannoy VX Series
Products utilised in Bi-Amplification mode

HP: VX12HP, VX15HP
Q-Centric: VX12Q, VX12.2Q, VX15Q, 
___________________________________________________________________

Application Notes: 


*** BI-AMP MODE ***

This Module has 3 Processed outputs:

1 = LF : Low Frequency Driver
2 = HF : High Frequency Driver Compliment
3 = SUB : Matched Sub output for use with the above


*** BI-AMP MODE CUT ***

This Module has 3 Processed outputs:

1 = LF : Low Frequency Driver with 80Hz Cut
2 = HF : High Frequency Driver Compliment
3 = SUB : Matched Sub output for use with the above 80Hz CUT

This BI-AMP CUT module can be used in combination with VSX Sub 
Module Files should a different combination other than the sub
within the module be required.
___________________________________________________________________

Routing:

Any channel can be routed to the required output from this module.
WARNING:: Ensure correct routing before use.
___________________________________________________________________

Technical info:
	
Amp Gain is 33 dB
(This is to align better with Lab.gruppen IPD Series)
If using with IPD & PLM please ensure the IPD is delayed by 1.16 mS
___________________________________________________________________

Fingerprint :	

No
___________________________________________________________________
*** Designed by TCGROUP AET ***

::: Thomas Vestergaard :::
